The 2005F balusters are the fluted block top version of our Sheraton Baluster and Newel Series. This design also comes in a plain (2005PL) and a twisted (2005T) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
These balusters require an additional CNC cutting on a 5 axis woodworking machine. Because of that - production time tends to be 10 woking days for all species.
The 2005PL balusters are the baseline block top balusters to our Sheraton Baluster and Newel Series. This design also comes in a fluted (2005F) and a twisted (2005T) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
We typically stock all sizes in Poplar and Red Oak. If we are out of stock or you order another wood species, production/shipping time is generally no later than 3 days.
Picture is correct but mislabeled. Picture is the 2005T.
The 2005T balusters are the twist block top version of our Sheraton Baluster and Newel Series. This design also comes in a plain (2005PL) and a fluted (2005F) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
These balusters require an additional CNC cutting on a 5 axis woodworking machine. Because of that - production time tends to be 10 woking days for all species.
This 1-3/4" baluster is part of our Hampton Series.
These balusters have a graduating base block and a consistent turning area of 17-1/2".
The 5105 baluster is similar, yet has a fixed base block of 7-1/2" and graduating turning areas.
Look for matching Hampton Series pin top and ball top newel posts with 35xx (3" square) and 45xx (3.5" square) part number designations.
This 1-3/4" baluster is part of our Hampton Series.
These balusters have a fixed base block of 7-1/2" and a graduated turning area.
The 5005 baluster is similar, yet has a graduating base and fixed turning area.
Look for matching Hampton Series pin top and ball top newel posts with 35xx (3" square) and 45xx (3.5" square) part number designations.
The 5205 balusters 1-1/4" are the baseline of our Hampton Baluster and Newel Series. There are matching 3" and 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 35xx or 45xx.
We typically stock all sizes in Poplar and Red Oak. If we are out of stock or you order another wood species, production/shipping time is generally no later than 3 days.
The 910 balusters are the baseline 1-1/4" wood balusters for our Classic Baluster and Newel Series. There are matching 3" and 3-1/2" square wood newels as well. Look for pin top and ball top wood newels where the part # begins with 95x.
We typically stock all sizes in Poplar and Red Oak. If we are out of stock or you order another wood species, production/shipping time is generally no later than 3 days.
The 909 balusters are the baseline 1-3/4" wood balusters for our Classic Baluster and Newel Series. There are matching 3" and 3-1/2" square wood newels as well. Look for pin top and ball top wood newels where the part # begins with 95x.
We typically stock all sizes in Gloss Primed, Poplar, Red Oak and Hard Maple. If we are out of stock or you order another wood species, production/shipping time is generally no later than 3 days.
This block top 1-3/4" baluster has a fixed bottom block at 7-1/2" tall and a variable top block from 4-1/2" to 6-1/4" tall. The turning length graduates as the balusters go up in size.
If we are out of stock or you order another wood species, production/shipping time is generally no later than 3 days.
This block top 1-3/4" baluster has a fixed bottom block at 7-1/2" tall and a fixed top block at 5" tall. The turning length graduates as the balusters go up in size. The 31" (not shown in the drawing - but available) has a 19" turning length.
If we are out of stock or you order another wood species, production/shipping time is generally no later than 3 days.
There are 3 lengths available - 34", 38" and 42".
This balusters differs from the 5005. This LJ-5005 has a 7" top block and a 20" turning length and variable bottom blocks. The 5005 baluster has a 5-3/4" top block and 1 17-1/2" turning length and variable bottom blocks.
Available in Gloss Primed, Poplar, Red Oak and Hard Maple.
For pdf drawing, please see: http://www.ljsmith.net/assets/files/cad/LJ5005.pdf
There are 3 lengths available including 34", 38", and 42".
These balusters are smooth sanded on all 4 sides with square edges and ready to paint (poplar) or stain.
Gloss prime is available .
For pdf drawing, please see - http://www.ljsmith.net/assets/files/cad/LJ5060.pdf