Application:
Curb Wall Level Run,Elevated Level Run
Width:
12-in
Use Location:
Interior Use Only
Pre-assembled panel that allows for simplified installation
Low Sheen Black finish
Panels eliminate the need to glue, sand, or drill for baluster holes; no marking or cutting to fit necessary
Installation hardware included
1/2-in x 1-1/2-in rectangular tube construction with .065 wall thickness
Every rake and level panel is predrilled on the top rung and includes screws for attachment to handrail
Rake and level panel runs cannot exceed 15-ft without a spacer newel
The 2005F balusters are the fluted block top version of our Sheraton Baluster and Newel Series. This design also comes in a plain (2005PL) and a twisted (2005T) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
These balusters require an additional CNC cutting on a 5 axis woodworking machine. Because of that - production time tends to be 10 woking days for all species.
The 2005PL balusters are the baseline block top balusters to our Sheraton Baluster and Newel Series. This design also comes in a fluted (2005F) and a twisted (2005T) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
We typically stock all sizes in Poplar and Red Oak. If we are out of stock or you order another wood species, production/shipping time is generally no later than 3 days.
Picture is correct but mislabeled. Picture is the 2005T.
The 2005T balusters are the twist block top version of our Sheraton Baluster and Newel Series. This design also comes in a plain (2005PL) and a fluted (2005F) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
These balusters require an additional CNC cutting on a 5 axis woodworking machine. Because of that - production time tends to be 10 woking days for all species.
Picture is correct but mislabeled. Picture is the 2015F.
The 2015F balusters are the fluted pin top version of our Sheraton Baluster and Newel Series. This design also comes in a plain (2015PL) and a twisted (2015T) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
These balusters require an additional CNC cutting on a 5 axis woodworking machine. Because of that - production time tends to be 10 woking days for all species.
The 2015PL balusters are the baseline pin top balusters to our Sheraton Baluster and Newel Series. This design also comes in a fluted (2015F) and a twisted (2015T) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
These balusters are available in gloss primed.
We typically stock all sizes in Gloss Primed, Poplar and Red Oak. If we are out of stock or you order another wood species, production/shipping time is generally no later than 3 days.
Picture is correct but mislabeled. Picture is the 2015T.
The 2015T balusters are the twist pin top version of our Sheraton Baluster and Newel Series. This design also comes in a plain (2015PL) and a fluted (2015F) series. There are matching 3-1/2" square wood newels as well. Look for pin top and post-to-post wood newels where the part # begins with 30xx.
These balusters require an additional CNC cutting on a 5 axis woodworking machine. Because of that - production time tends to be 10 woking days for all species.
3000-3.5 - Rail Bolt - 3-1/2" (nut sold separately)
sold individually
3-1/2 inch Rail Bolt - Does not come with 5/16" threaded nut.
3-1/2-in Rail or hanger bolt
Use with 2812-FWMT and 2813-NTMT to connect handrail to: handrail, handrail fitting, newel or wall; or connect handrail fitting to handrail fitting