C-CLEANER KIT - Stainless Steel Cleaner & Protectant
- 20%
Add To Cart
$ 158.38 $ 197.98
Includes 4FL OZ Boeshield T-9 and 8.45FL OZ Boeshield Rust Free Use Boeshield T-9 after cleaning with RustFree to protect stainless steel cable Directions: For light rust on steel or cast iron, spray RustFree on a rag and wipe surface; Do not spray directly on surface, as it may cause spotting; For heavy rust, spray directly on rusted surface and scrub with Scotch-Brite pad; Wipe off and repeat if necessary; RustFree works best above 70¡ F
Add To Cart
C-CUTTER - Cable Cutter Tool
- 19%
Add To Cart
$ 101.66 $ 127.07
Cable Cutter Tool For maximum 1/8-in cable diameter Use for trimming excess cable  
Add To Cart
C-PROTECTOR - Post Protector Tube
Add To Cart
$ 4.69
Select a C-PROTECTOR (Post Protector Tube) for each instance where the cable enters or exits a Level Pass Thought Newel at an angle.  Post Protector Tubes keep the cable from "biting" into the wood. See linear collection installation instructions at http://assets.ljsmith.com/assets/files/pdf/Linear%20Collection%20Cable%20Instructions.pdf
Add To Cart
C-RELEASE - Cable Release Tool C-RELEASE - Cable Release Tool
- 19%
Add To Cart
$ 15.29 $ 19.11
Used to release the cable from the fitting if the cable lay is not smooth upon full insertion into the fitting the first time A second attempt can then be made to install the cable end into the fitting  
Add To Cart
From $ 82.88
Level Blank Newel (3-1/3" square by 47-1/2") for Cable or Tube System. This newel is not pre-drilled and can be made custom drilled at the job site and used in level applications. Available in red oak or hard maple. Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8" open wrenches as described in the installation instructions.      
From $ 91.18
Level Down Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for use on the second floor landing at top go the stairway flight on Cable System. Available in red oak or hard maple. Each newel post comes with a  3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems.  Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and  40-3/8" on a 42" system. Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8"...
From $ 91.18
Level Pass Through Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for use on the level runs either midway (or no greater than 42" spans) between Level Start/Stop, Corner or Down Newels on a Cable system. Available in red oak or hard maple. Each newel post comes with a  3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems.  Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and  40-3/8" on a 42" system. Due to the nature of wood, the tension...
From $ 120.23
Level Corner Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for use at the corner of two level runs on Cable System. Available in red oak or hard maple. Each newel post comes with a  3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems.   Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and  40-3/8" on a 42" system. Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8" open wrenches...
From $ 91.18
Level Start/Stop Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for beginning or end of each level run on Cable System. Available in red oak or hard maple. Each newel post comes with a  3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems.  Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and  40-3/8" on a 42" system. Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8" open wrenches as...
From $ 91.18
Rake Up Newel (3-1/3" square by 35-3/4" or 38-3/4") for use on the first tread at the bottom of the stairway on a Cable System. Available in red oak or hard maple. Each newel post comes with a  3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36" and 39" rail height systems.  Please note the newel lengths on the are 35-3/4" on a 36" system and 38-3/4" on a 39" system.  Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8" open wrenches as described in the installation...
From $ 91.18
Rake Pass Through Newel (3-1/3" square by 35-3/4" or 38-3/4") for use on the rake portion of the stairs either midway or 42" (or less") intervals between the newels at the bottom and top of each flight on a Cable System. Available in red oak or hard maple. Each newel post comes with a  3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36" and 39" rail height systems.  Please note the newel lengths on the are 35-3/4" on a 36" system and 38-3/4" on a 39" system.  Due to the nature of wood, the tension on...
CABLE-050-SS - 50' of 1/8" Marine Grade 316 Stainless Steel Cable CABLE-050-SS - 50' of 1/8" Marine Grade 316 Stainless Steel Cable
- 24%
Add To Cart
$ 58.25 $ 77.66
50' of stainless steel cable Marine grade stainless steel cable We recommend using our Cable Release Tool C-RELEASE and Cable Cutter C-CUTTER during installation The tension on the cables will need periodic adjustment by using two 3/8-in open end wrenches, as described in the installation instructions Use C-CLEANER Stainless Steel Cleaner & Protectant to keep your cable clean and protected Use with C-PROTECTOR to prevent cable from biting into wood newels Swageless Cable Fittings eliminate the need for expensive equipment Use with box or square nose treads to create a modern designed stairway  
Add To Cart
  • 1
  • 2
img

Added to cart successfully!