Level Blank Newel (3-1/3" square by 47-1/2") for Cable or Tube System.
This newel is not pre-drilled and can be made custom drilled at the job site and used in level applications.
Available in red oak or hard maple.
Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8" open wrenches as described in the installation instructions.
Application:
Rake Blank Newel
System:
Cable or Tube Rake System
Dimensions:
3-1/2-in x 47-1/2-in
Our unique Linear Collection wood newels are sized for simplified installation and you will find variations to satisfy most stairway applications and layouts.
KEY FEATURES:
Can be used with cable or tube system
This newel is not predrilled and can be custom drilled and trimmed to be used at any rake location
Each newel post includes a 3/4-in x 2-in wood dowel for attaching the handrail
Apply 3-4 coats of polyurethane finish for the best protection
L.J. Smith Stair Systems offers a complete line of stairway installation hardware designed specifically for stair installers to strengthen and speed up installations. Select from several baluster and handrail fasteners, wood plugs, wood glue, epoxy and wood putty.
KEY FEATURES:
Contractor Epoxy Adhesive
Open work time is 18 minutes
Fills approximately 122 holes depending on hole size
Level Corner Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for use at the corner of two level runs on Tube System.
Available in red oak or hard maple.
Each newel post comes with a 3/4" x 2" wood dowel for attaching the 684 wood handrail.
Available for 36", 39" and 42" rail height systems. Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and 40-3/8" on a 42" system.
Level Start/Stop Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for beginning or end of each level run on Tube System. Tube should be installed into a newel post at the end of the level run that is placed next to the wall. Available in red oak or hard maple. Each newel post comes with a 3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems. Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and 40-3/8" on a 42" system. ...
20' section of 3/4" Hollow 304 Grade Stainless Steel Tube. Calculate enough tube to run between every tube system newel selected. TR/TL-410/420-36 require 7 tubes. TR/TL-410/420-39 require 8 tubes. TR/TL-410/420-42 requires 9 tubes. 20' Length of 3/4" Hollow 304 Grade Stainless Steel Tube CABLE SYEYEMS: If using 3/4" Tube as a stabilizing member between newels in a cable system, select enough tube to run between each newel. TUBE SYSTEMS: Select enough 3/4" Tube to run between every tube system newel selected. TR/TL-410/420-36 requires 7 tubes; TR/TL-410/420-39 requires 8 tubes; TR/TL-410/420-42 requires 9 tubes. Stainless Steel hollow tube is available 5' (TUBE-005-SS)...
5/8-in hollow steel tube, Low Sheen Black
Use suggested adhesives LI-3701, 6100E-10AD, or EGEXTREME-10AD
Tube infill is intended to be used as a guard/fence and is not intended for overhead or any condition involving motion