We will send you an email to reset your password.
From $ 31.34
This is a 6' piece of the Middle Moulding used on the following Box Newels:
960
961
962
963
Moulding is 6' long x 21mm deep x 26mm tall
Available in Poplar, Red Oak and Hard Maple.
- 20%
$ 158.38
$ 197.98
Includes 4FL OZ Boeshield T-9 and 8.45FL OZ Boeshield Rust Free
Use Boeshield T-9 after cleaning with RustFree to protect stainless steel cable
Directions: For light rust on steel or cast iron, spray RustFree on a rag and wipe surface; Do not spray directly on surface, as it may cause spotting; For heavy rust, spray directly on rusted surface and scrub with Scotch-Brite pad; Wipe off and repeat if necessary; RustFree works best above 70¡ F
- 25%
$ 95.30
$ 127.07
Cable Cutter Tool
For maximum 1/8-in cable diameter
Use for trimming excess cable
- 30%
$ 5.18
$ 7.40
For maximum 1/8-in cable diameter
Used to protect cable from biting into wood
Used every instance where cable enters and exits a wood level pass through newel at an angle
Use with Linear Collection wood level pass through newels
- 25%
$ 14.33
$ 19.11
Used to release the cable from the fitting if the cable lay is not smooth upon full insertion into the fitting the first time
A second attempt can then be made to install the cable end into the fitting
From $ 33.28
This is a 6' piece of the Bottom Moulding used on the following Box Newels:
960
961
962
963
Moulding is 6' long x 19mm deep x 33mm tall
Available in Poplar, Red Oak and Hard Maple.
- 29%
From $ 166.97
$ 238.52
Level Blank Newel (3-1/3" square by 47-1/2") for Cable or Tube System.
This newel is not pre-drilled and can be made custom drilled at the job site and used in level applications.
Available in red oak or hard maple.
Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8" open wrenches as described in the installation instructions.
- 30%
From $ 146.06
$ 208.66
Application:
Rake Blank Newel
System:
Cable or Tube Rake System
Dimensions:
3-1/2-in x 47-1/2-in
Our unique Linear Collection wood newels are sized for simplified installation and you will find variations to satisfy most stairway applications and layouts.
KEY FEATURES:
Can be used with cable or tube system
This newel is not predrilled and can be custom drilled and trimmed to be used at any rake location
Each newel post includes a 3/4-in x 2-in wood dowel for attaching the handrail
Apply 3-4 coats of polyurethane finish for the best protection
- 29%
From $ 143.44
$ 204.91
Level Pass Through Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for use on the level runs either midway (or no greater than 42" spans) between Level Start/Stop, Corner or Down Newels on a Cable system. Available in red oak or hard maple. Each newel post comes with a 3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems. Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and 40-3/8" on a 42" system. Due to the nature of wood, the tension...
- 19%
$ 625.42
$ 781.77
Each of our powder coated Linear metal newels are sized and machine drilled for simplified installation and their aluminum construction with powder coat finish is ideal for interior or exterior projects. The 36 different newels in this collection will accommodate most stairway applications and layouts.
Use with Linear Collection cable system
Predrilled with 10 holes for simplified installation
Use on open tread stairs at 42-in intervals between the newels at the bottom and top of each flight
Designed for stairways with 7-1/2-in rise and 10-in run (approx. 36.9°)
Powder coated Low Sheen Black finish
