We will send you an email to reset your password.
- 30%
From $ 3.99
$ 5.76
Crafted from 1/2" square hollow stock. Available in 44" length.
This baluster is very similar in dimension to the former H-IB2555 that we have sold for years online.
In stock in 5 finishes: LSB - Low Sheen Black, ABZ - Antique Bronze, ORC - Oil Rubbed Copper, and ORB - Oil Rubbed Bronze, MN - Matte Nickel
- 29%
From $ 14.90
$ 21.28
Crafted from 1-1/2" square hollow stock. Available in 44" length.
Available in Low Sheen Black (LSB) and Matte Nickel (MN).
- 35%
$ 12.98
$ 19.97
Crafted from 1/2" square hollow stock. Available in 44" length.
Available in Low Sheen Black (LSB).
- 35%
From $ 14.65
$ 22.54
Crafted from 1/2" square hollow stock. Available in 44" length.
Dimensions are 1/2" x 3-3/4" x 44". Oval is 21" tall.
Available in Low Sheen Black (LSB) and Matte Nickel (MN).
Use with LI-ALM06 (flat) shoes or LI-ALPSH02 (pitch) shoes with 1/2" square opening.
- 29%
From $ 14.41
$ 20.58
Crafted from 1/2" square hollow stock. Available in 44" length.
Dimensions are 1/2" x 3-3/4" x 44".
Available in Low Sheen Black (LSB) and Matte Nickel (MN).
Use with LI-ALM06 (flat) shoes or LI-ALPSH02 (pitch) shoes with 1/2" square opening.
Lower you cost by using one or two LIH-HOLPL44 plain bar balusters in between each rectangle.
- 30%
From $ 17.72
$ 25.32
Crafted from 1/2" square hollow stock. Available in 44" length.
Dimensions are 1/2" x 2-1/2" x 44".
Available in Low Sheen Black (LSB) and Matte Nickel (MN).
- 30%
$ 2.02
$ 2.89
Designed to give a clean, finished look without the need for adhesives or shoes
Simply slide the plastic insert into the bottom of the trimmed baluster, install the dowel screw into the tread, and screw the plastic insert and baluster tight against the tread surface
For use with our 1/2-in hollow square iron balusters
Includes tapered plastic insert, dowel screw, and instructions. For open tread and level run applications
- 30%
$ 2.86
$ 4.09
Designed to give a clean, finished look without the need for adhesives or shoes.
- 29%
$ 3.09
$ 4.41
This unique Base Collar with Threaded Disc is used at the bottom of 1/2" square iron balusters on open treads or level run applications. Constructed from aluminum material.
IronPro is ideal for new construction, as well as remodeling any stairway from wood balusters to iron balusters.
Available only in Low Sheen Black.
- 29%
From $ 1.32
$ 1.89
Used at the bottom of 1/2" square iron balusters in most all applications or at the top of iron landing balusters against the handrail. When used at the top, product is often times called a "collar".
Includes a hexagonal set screw. Set screw is tightened with a 3/16" Allen hex key.
Constructed from aluminum material.
- 30%
From $ 1.54
$ 2.20
Used at the bottom of our rake 1/2" square iron balusters in knee wall applications or at the top of rake iron balusters against the handrail. When used at the top, product is often times called a "collar".
Includes a hexagonal set screw. Set screw is tightened with a 3/16" Allen hex key.
Constructed from aluminum material.
- 29%
$ 21.62
$ 30.88
This non-sag adhesive is a flexible and highly versatile rubber-based compound that exhibits exceptional adhesive contact and sealant qualities
It is perfect for vertical or overhead use such as drilled holes on the underside of handrail for iron baluster installation
The tack time is approximately 4 minutes with a full cure time of 24-72 hours, depending upon amount used, temperature and humidity
Use with a standard caulk gun cartridge
Fills approximately 110 holes depending on hole size
10.2 Oz Clear Adhesive; Dries clear
