50' of stainless steel cable
Marine grade stainless steel cable
We recommend using our Cable Release Tool C-RELEASE and Cable Cutter C-CUTTER during installation
The tension on the cables will need periodic adjustment by using two 3/8-in open end wrenches, as described in the installation instructions
Use C-CLEANER Stainless Steel Cleaner & Protectant to keep your cable clean and protected
Use with C-PROTECTOR to prevent cable from biting into wood newels
Swageless Cable Fittings eliminate the need for expensive equipment
Use with box or square nose treads to create a modern designed stairway
150' of stainless steel cable
Marine grade stainless steel cable
We recommend using our Cable Release Tool C-RELEASE and Cable Cutter C-CUTTER during installation
The tension on the cables will need periodic adjustment by using two 3/8-in open end wrenches, as described in the installation instructions
Use C-CLEANER Stainless Steel Cleaner & Protectant to keep your cable clean and protected
Use with C-PROTECTOR to prevent cable from biting into wood newels
Swageless Cable Fittings eliminate the need for expensive equipment
Use with box or square nose treads to create a modern designed stairway
500' spool of stainless steel cable
Marine grade stainless steel cable
We recommend using our Cable Release Tool C-RELEASE and Cable Cutter C-CUTTER during installation
The tension on the cables will need periodic adjustment by using two 3/8-in open end wrenches, as described in the installation instructions
Use C-CLEANER Stainless Steel Cleaner & Protectant to keep your cable clean and protected
Use with C-PROTECTOR to prevent cable from biting into wood newels
Swageless Cable Fittings eliminate the need for expensive equipment
Use with box or square nose treads to create a modern designed stairway
Used to release the cable from the fitting if the cable lay is not smooth upon full insertion into the fitting the first time
A second attempt can then be made to install the cable end into the fitting
To ensure performance of our system, a stabilizing member such as a 3/4" tube or S4S wood (1-3/4" or 2" square recommended) is required between all newel posts at the top pre-drilled position. Each level cable run requires a CL-WDFTGS-SS (Level Fixed/Tensioner Pair). Calculate the level cable fitting pairs needed by taking the number of straight level runs times the number of pairs required for the selected cable system level newels. CL-410-36 newels require 9 pairs when installing a stabilizing member at the top position (10 pairs without stabilizing member); CL-410-39 newels require 10 pairs when installing a stabilizing member at...
To ensure performance of our system, a stabilizing member such as a 3/4" tube or S4S wood (1-3/4" or 2" square recommended) is required between all newel posts at the top pre-drilled position. Each level cable run requires a CL-WDFTGS-SS (Level Fixed/Tensioner Pair). Calculate the level cable fitting pairs needed by taking the number of straight level runs times the number of pairs required for the selected cable system level newels. CL-410-36 newels require 9 pairs when installing a stabilizing member at the top position (10 pairs without stabilizing member); CL-410-39 newels require 10 pairs when installing a stabilizing member at...
To ensure performance of our system, a stabilizing member such as a 3/4" tube or S4S wood (1-3/4" or 2" square recommended) is required between all newel posts at the top pre-drilled position. Each rake cable run requires a CR-WDFTGS-SS (Rake Fixed/Tensioner Pair). Calculate the rake cable fitting pairs needed based on the cable system Rake Up Newel(s) selected. CR-410-36 newels require 9 pairs when installing a stabilizing member at the top position (10 pairs without stabilizing member); CR-410-39 newels require 10 pairs when installing a stabilizing member at the top position (11 pairs without stabilizing member); CR-410-42 newels require 11 pairs when installing a...
To ensure performance of our system, a stabilizing member such as a 3/4" tube or S4S wood (1-3/4" or 2" square recommended) is required between all newel posts at the top pre-drilled position. Each rake cable run requires a CR-WDFTGS-SS (Rake Fixed/Tensioner Pair). Calculate the rake cable fitting pairs needed based on the cable system Rake Up Newel(s) selected. CR-410-36 newels require 9 pairs when installing a stabilizing member at the top position (10 pairs without stabilizing member); CR-410-39 newels require 10 pairs when installing a stabilizing member at the top position (11 pairs without stabilizing member); CR-410-42 newels require 11 pairs when installing a...
Level Start/Stop Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for beginning or end of each level run on Cable System. Available in red oak or hard maple. Each newel post comes with a 3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems. Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and 40-3/8" on a 42" system. Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8" open wrenches as...
Level Corner Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for use at the corner of two level runs on Cable System. Available in red oak or hard maple. Each newel post comes with a 3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems. Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and 40-3/8" on a 42" system. Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8" open wrenches...
Level Down Newel (3-1/3" square by 34-3/8", 37-3/8" or 40-3/8") for use on the second floor landing at top go the stairway flight on Cable System. Available in red oak or hard maple. Each newel post comes with a 3/4" x 2" wood dowel for attaching the 684 wood handrail. Available for 36", 39" and 42" rail height systems. Please note the newel lengths on the are 34-3/8" on a 36" system, 37-3/8" on a 39" system and 40-3/8" on a 42" system. Due to the nature of wood, the tension on the cables will need periodic adjustment by using two 3/8"...