6100E - Multi Purpose Adhesive - StairPartsNow.com
- 30%
Add To Cart
$ 21.60 $ 30.88
This non-sag adhesive is a flexible and highly versatile rubber-based compound that exhibits exceptional adhesive contact and sealant qualities It is perfect for vertical or overhead use such as drilled holes on the underside of handrail for iron baluster installation The tack time is approximately 4 minutes with a full cure time of 24-72 hours, depending upon amount used, temperature and humidity Use with a standard caulk gun cartridge Fills approximately 110 holes depending on hole size 10.2 Oz Clear Adhesive; Dries clear
Add To Cart
LIH-HOLINSERTW/SCREW — Concealed Fastener for 1/2" Balusters LIH-HOLINSERTW/SCREW — Concealed Fastener for 1/2" Balusters
- 30%
Add To Cart
$ 2.02 $ 2.89
Designed to give a clean, finished look without the need for adhesives or shoes Simply slide the plastic insert into the bottom of the trimmed baluster, install the dowel screw into the tread, and screw the plastic insert and baluster tight against the tread surface For use with our 1/2-in hollow square iron balusters Includes tapered plastic insert, dowel screw, and instructions. For open tread and level run applications        
Add To Cart
LIH-1/2" IRON BALUSTER CONCEALED KIT LIH-1/2" IRON BALUSTER CONCEALED KIT
NEW
- 30%
Add To Cart
$ 2.86 $ 4.09
Designed to give a clean, finished look without the need for adhesives or shoes Simply install the lag of the assembled fastener into the wood tread, kneewall plate or landing tread and slide the bottom of the trimmed baluster over the fastener until the baluster is tight against the wood mounting surface. For use with our 1/2-in hollow square iron balusters and includes instructions. For open tread stair, kneewall stair and level run applications
Add To Cart
LJ-PIN EZ - 3/4" Pin Insert for Block Balusters
- 30%
Add To Cart
$ 0.23 $ 0.33
If the balusters you purchase do not come with bottom pins and you need them, then simply order the LJ-PIN-EZ.  These are 1-3/4" deep with a 9/32" dowel pin and a 3/4" bottom pin. You made find the LJ-3035 Centaur tool and LJ-3036 Dowel-Fast Tap handy on large jobs. Wood Baluster Pin Used in the predrilled hole in our "LJ" line wood balusters Provides an alternate installation method
Add To Cart
LJ-3044 - VersaTool Handrail Wrench - StairPartsNow.com
- 24%
Add To Cart
$ 16.30 $ 21.73
This is the "must have" tool for all stair jobs. Here's why..... Our VersaTool locates holes as well as starts and tightens hex nuts onto rail bolts Drives 5/16 rail bolts and tightens 1/2 hex nuts Also used to locate 1/4 pilot hole on handrails & rail drops for attaching to Conect-A-Kit handrail fittings Instructions included
Add To Cart
LJ-3079 — Rail Bolt Kit - StairPartsNow.com
- 29%
From $ 2.13 $ 3.04
LJ-3079 — Rail Bolt Kit Use to attach handrail to; handrail, fitting, newel, wall; or fittings to fittings. Select wood species for desired 1" diameter tapered wood plug. To view instructions, see:   http://ljsmith.com/assets/files/pdf/3079.pdf  
3000-3.5 - Rail Bolt - 3-1/2" long 3000-3.5 - Rail Bolt - 3-1/2" long
- 30%
Add To Cart
$ 0.84 $ 1.20
3000-3.5 - Rail Bolt - 3-1/2" (nut sold separately)  sold individually 3-1/2 inch Rail Bolt - Does not come with 5/16" threaded nut. 3-1/2-in Rail or hanger bolt Use with 2812-FWMT and 2813-NTMT to connect handrail to: handrail, handrail fitting, newel or wall; or connect handrail fitting to handrail fitting
Add To Cart
LJ-3000-5 - Hanger Bolt - 5" (nut sold separately) LJ-3000-5 - Hanger Bolt - 5" (nut sold separately)
- 29%
Add To Cart
$ 1.74 $ 2.48
5 inch Rail Bolt - Does not come with 5/16" threaded  bolt or washer 5-in Rail or hanger bolt Use with 2813-NTMT and S-3101 to mount wood newel posts to the floor or to fasten handrail through a rosette to the wall
Add To Cart
2813 - Nut - 5/16" (sold individually) 2813 - Nut - 5/16" (sold individually)
- 28%
Add To Cart
$ 0.10 $ 0.14
5/16" nut for 3-1/2" and 5" rail bolts
Add To Cart
S-3101 - Curved Plastic Washer (sold individually)
Add To Cart
$ 0.50
Curved Washer (Per Each)
Add To Cart
LJ-3000 - Tapered Wood Plug - 1" LJ-3000 - Tapered Wood Plug - 1"
- 24%
From $ 0.64 $ 0.85
1" tapered plug for use with rail bolts
From $ 2.26
1-1/2" tapered plug for use with rail bolts
img

Added to cart successfully!