Crafted from 1/2" square hollow stock. Available in 44" length.
This baluster is very similar in dimension to the former H-IB2555 that we have sold for years online.
In stock in 5 finishes: LSB - Low Sheen Black, ABZ - Antique Bronze, ORC - Oil Rubbed Copper, and ORB - Oil Rubbed Bronze, MN - Matte Nickel
Crafted from 1/2" square hollow stock. Available in 44" length.
Dimensions are 1/2" x 3-3/4" x 44". Oval is 21" tall.
Available in Low Sheen Black (LSB) and Matte Nickel (MN).
Use with LI-ALM06 (flat) shoes or LI-ALPSH02 (pitch) shoes with 1/2" square opening.
Crafted from 1/2" square hollow stock. Available in 44" length.
Dimensions are 1/2" x 3-3/4" x 44".
Available in Low Sheen Black (LSB) and Matte Nickel (MN).
Use with LI-ALM06 (flat) shoes or LI-ALPSH02 (pitch) shoes with 1/2" square opening.
Lower you cost by using one or two LIH-HOLPL44 plain bar balusters in between each rectangle.
Crafted from 1/2" square hollow stock. Available in 44" length.
Dimensions are 1/2" x 2-1/2" x 44".
Available in Low Sheen Black (LSB) and Matte Nickel (MN).
Designed to give a clean, finished look without the need for adhesives or shoes
Simply slide the plastic insert into the bottom of the trimmed baluster, install the dowel screw into the tread, and screw the plastic insert and baluster tight against the tread surface
For use with our 1/2-in hollow square iron balusters
Includes tapered plastic insert, dowel screw, and instructions. For open tread and level run applications
Used at the bottom of 1/2" square iron balusters in most all applications or at the top of iron landing balusters against the handrail. When used at the top, product is often times called a "collar".
Includes a hexagonal set screw. Set screw is tightened with a 3/16" Allen hex key.
Constructed from aluminum material.
Used at the bottom of our rake 1/2" square iron balusters in knee wall applications or at the top of rake iron balusters against the handrail. When used at the top, product is often times called a "collar".
Includes a hexagonal set screw. Set screw is tightened with a 3/16" Allen hex key.
Constructed from aluminum material.