We will send you an email to reset your password.
- 30%
$ 21.60
$ 30.88
This non-sag adhesive is a flexible and highly versatile rubber-based compound that exhibits exceptional adhesive contact and sealant qualities
It is perfect for vertical or overhead use such as drilled holes on the underside of handrail for iron baluster installation
The tack time is approximately 4 minutes with a full cure time of 24-72 hours, depending upon amount used, temperature and humidity
Use with a standard caulk gun cartridge
Fills approximately 110 holes depending on hole size
10.2 Oz Clear Adhesive; Dries clear
- 30%
$ 2.86
$ 4.09
Designed to give a clean, finished look without the need for adhesives or shoes
Simply install the lag of the assembled fastener into the wood tread, kneewall plate or landing tread and slide the bottom of the trimmed baluster over the fastener until the baluster is tight against the wood mounting surface.
For use with our 1/2-in hollow square iron balusters and includes instructions. For open tread stair, kneewall stair and level run applications
- 24%
$ 16.30
$ 21.73
This is the "must have" tool for all stair jobs.
Here's why.....
Our VersaTool locates holes as well as starts and tightens hex nuts onto rail bolts
Drives 5/16 rail bolts and tightens 1/2 hex nuts
Also used to locate 1/4 pilot hole on handrails & rail drops for attaching to Conect-A-Kit handrail fittings
Instructions included
- 25%
$ 99.99
$ 133.34
The Zipbolt Drill Guide is used to align and drill Zipbolt hardware connection holes
This tool makes the job of boring accurately into the end grain of rails and fittings much easier
Instructions included
- 25%
$ 2.06
$ 2.75
The Zipbolt Driver is used in place of an allen wrench to install Zipbolt connectors
- 24%
$ 24.53
$ 32.70
Zipbolt Hardware
Use to connect handrail to fitting or handrail to handrail
2 Pack
Includes red oak wood plugs and driver
- 25%
$ 27.11
$ 36.15
Zipbolt Hardware
Use to connect handrail to a post to post newel at the top end of the stair rake
2 Pack
Includes red oak wood plugs and driver
- 25%
$ 27.70
$ 36.94
Zipbolt Hardware
Use to connect level handrail to post to post newels
2 Pack
Includes red oak wood plugs and driver
- 24%
$ 13.30
$ 17.73
The Dowel-Runner is a drill attachment with lag threads to drive LJ-3076 dowel screws into wood baluster bases
Instructions included
$ 48.25
L.J. Smith Stair Systems offers a complete line of stairway installation hardware designed specifically for stair installers to strengthen and speed up installations. Select from several baluster and handrail fasteners, wood plugs, wood glue, epoxy and wood putty.
KEY FEATURES:
Contractor Epoxy Adhesive
Open work time is 18 minutes
Fills approximately 122 holes depending on hole size
- 1
- 2
