LJ-PIN EZ - 3/4" Pin Insert for Block Balusters
- 30%
Add To Cart
$ 0.23 $ 0.33
If the balusters you purchase do not come with bottom pins and you need them, then simply order the LJ-PIN-EZ.  These are 1-3/4" deep with a 9/32" dowel pin and a 3/4" bottom pin. You made find the LJ-3035 Centaur tool and LJ-3036 Dowel-Fast Tap handy on large jobs. Wood Baluster Pin Used in the predrilled hole in our "LJ" line wood balusters Provides an alternate installation method
Add To Cart
LJ-3044 - VersaTool Handrail Wrench - StairPartsNow.com
- 24%
Add To Cart
$ 16.30 $ 21.73
This is the "must have" tool for all stair jobs. Here's why..... Our VersaTool locates holes as well as starts and tightens hex nuts onto rail bolts Drives 5/16 rail bolts and tightens 1/2 hex nuts Also used to locate 1/4 pilot hole on handrails & rail drops for attaching to Conect-A-Kit handrail fittings Instructions included
Add To Cart
LJ-3079 — Rail Bolt Kit - StairPartsNow.com
- 29%
From $ 2.13 $ 3.04
LJ-3079 — Rail Bolt Kit Use to attach handrail to; handrail, fitting, newel, wall; or fittings to fittings. Select wood species for desired 1" diameter tapered wood plug. To view instructions, see:   http://ljsmith.com/assets/files/pdf/3079.pdf  
3000-3.5 - Rail Bolt - 3-1/2" long 3000-3.5 - Rail Bolt - 3-1/2" long
- 30%
Add To Cart
$ 0.84 $ 1.20
3000-3.5 - Rail Bolt - 3-1/2" (nut sold separately)  sold individually 3-1/2 inch Rail Bolt - Does not come with 5/16" threaded nut. 3-1/2-in Rail or hanger bolt Use with 2812-FWMT and 2813-NTMT to connect handrail to: handrail, handrail fitting, newel or wall; or connect handrail fitting to handrail fitting
Add To Cart
LJ-3000-5 - Hanger Bolt - 5" (nut sold separately) LJ-3000-5 - Hanger Bolt - 5" (nut sold separately)
- 29%
Add To Cart
$ 1.74 $ 2.48
5 inch Rail Bolt - Does not come with 5/16" threaded  bolt or washer 5-in Rail or hanger bolt Use with 2813-NTMT and S-3101 to mount wood newel posts to the floor or to fasten handrail through a rosette to the wall
Add To Cart
2813 - Nut - 5/16" (sold individually)
- 28%
Add To Cart
$ 0.10 $ 0.14
5/16" nut for 3-1/2" and 5" rail bolts
Add To Cart
S-3101 - Curved Plastic Washer (sold individually)
Add To Cart
$ 0.50
Curved Washer (Per Each)
Add To Cart
LJ-3000 - Tapered Wood Plug - 1" LJ-3000 - Tapered Wood Plug - 1"
- 24%
From $ 0.64 $ 0.85
1" tapered plug for use with rail bolts
From $ 2.26
1-1/2" tapered plug for use with rail bolts
Zipbolt Drill Guide - StairPartsNow.com
- 25%
Add To Cart
$ 99.99 $ 133.34
The Zipbolt Drill Guide is used to align and drill Zipbolt hardware connection holes This tool makes the job of boring accurately into the end grain of rails and fittings much easier Instructions included
Add To Cart
Zipbolt Driver Tool - StairPartsNow.com
- 25%
Add To Cart
$ 2.06 $ 2.75
The Zipbolt Driver is used in place of an allen wrench to install Zipbolt connectors
Add To Cart
Zipbolt Rail Bolt - StairPartsNow.com
Add To Cart
$ 8.45
Zipbolt Hardware Use to connect handrail to fitting or handrail to handrai
Add To Cart
  • 1
  • 2
img

Added to cart successfully!